Certificates of Analysis are written in analytical-chemistry shorthand. This glossary defines the terms researchers meet most often on a peptide COA, in plain English, with links to longer explanations. Start with how to read a peptide COA for the overall structure of a certificate.
The Glossary
Certificate of Analysis (COA): A laboratory document reporting measured characteristics of a tested sample from a specific lot.
Lot (batch) number: The identifier linking a certificate to one production run of material.
Test date: The date the sample was analyzed.
Third-party testing: Analysis performed by a laboratory independent of the supplier.
HPLC: High-performance liquid chromatography; separates components of a sample so their relative amounts can be measured.
RP-HPLC: Reversed-phase HPLC, using a hydrophobic column (often C18) and a water/organic solvent gradient; the standard method for peptide purity.
Chromatogram: The trace of detector response against time produced by an HPLC run.
Retention time: The time at which a species elutes from the column.
Peak area %: Each peak's share of the total integrated area; the main peak's value is reported as HPLC purity.
UV detection (214/220 nm): Detection at wavelengths where peptide bonds absorb, used for most peptide purity methods.
Mass spectrometry (MS): A technique measuring mass-to-charge ratio of ions; used on a COA to confirm identity.
ESI / MALDI: Two common ionization methods used to get peptides into a mass spectrometer.
Observed vs theoretical mass: The measured mass compared with the mass calculated from the sequence; close agreement supports identity.
m/z: Mass-to-charge ratio, the quantity a mass spectrometer actually measures. Larger peptides often appear as several charge states.
Molecular weight (MW): The mass of one molecule, usually in daltons (Da) or g/mol.
CAS number: A registry identifier for a specific chemical substance.
Sequence: The order of amino acids in the peptide, often written in one-letter or three-letter codes.
Purity: The proportion of the peptide-related material that is the target peptide, usually by HPLC.
Net peptide content: The fraction of the powder's weight that is peptide, after accounting for water, counter-ions and salts.
Counter-ion (TFA / acetate): The ion paired with charged groups on the peptide, left over from synthesis or purification.
Water content (Karl Fischer): Moisture in the powder, often measured by Karl Fischer titration.
Appearance: A visual description of the material, for example white lyophilized powder.
Lyophilized: Freeze-dried; the usual supplied form for research peptides.
Deletion sequence: An impurity missing one or more residues from the target sequence.
Truncated sequence: An impurity in which chain assembly stopped early.
Oxidation: A chemical change, common at Met, Cys and Trp residues, that adds mass (often +16 Da).
Deamidation: Conversion of Asn or Gln side chains, shifting mass by about +1 Da.
Endotoxin (LAL): Bacterial lipopolysaccharide, measured by the Limulus amebocyte lysate assay in endotoxin units.
Specification: The acceptance limits a result is compared with, such as purity of at least 98%.
Pass / Conforms: A statement that a result meets its specification.
Batch-specific COA: A certificate for the exact lot being supplied.
Representative COA: A certificate for an earlier or typical batch, shown as an example.
RUO: Research use only; material sold for laboratory research, not for human or veterinary use.
Go Deeper
HPLC and MS explained, reading an HPLC chromatogram, CAS numbers and mass spectra, net content vs purity, acetate vs TFA, endotoxin testing, lot traceability, batch-specific vs representative COAs, and how to verify a COA.
See Real Certificates
Our COA library lists published lot certificates from our third-party lab. Reports describe tested samples; confirm the compound, size and lot supplied before relying on any report. More in the pillar Researcher's Guide to Peptides in 2026.
Frequently Asked Questions
What does HPLC stand for on a COA?
High-performance liquid chromatography, the technique used to separate a sample and measure the purity of the target peptide.
What is m/z on a peptide mass spectrum?
The mass-to-charge ratio of an ion. Peptides can carry several charges, so one peptide may appear at several m/z values.
What is the difference between purity and net peptide content?
Purity compares the target peptide with other peptide-related species. Net peptide content is the share of the total powder weight that is peptide, after water and counter-ions.
What does TFA mean on a peptide COA?
Trifluoroacetate, a common counter-ion left from peptide purification. Some peptides are supplied as acetate salts instead.
What does RUO mean?
Research use only. The material is sold for laboratory research and is not for human or veterinary use.
All products referenced in this article are sold strictly for laboratory research use only. They are not for human or veterinary use, are not drugs, foods, or cosmetics, and are not intended to diagnose, treat, cure, or prevent any disease. A Certificate of Analysis is an analytical record for a tested sample; it is research verification only and is not a statement of safety or suitability for any use outside a qualified laboratory.
