Reading a COA and verifying one are different tasks. Reading means understanding what the numbers say (see how to read a peptide COA). Verifying means confirming that the document is genuine and that it describes the specific material on your bench. The checklist below is the routine many labs use when logging incoming research materials.
Step 1: Match the Lot Number to the Vial
Find the lot or batch number on the vial label and on the certificate. They should be identical. Record both in your lab notebook or inventory system. If they differ, the certificate documents a different batch.
Step 2: Match the Compound and Size
Confirm the compound name and the tested size or net content. For multi-size products, a certificate for one size does not automatically cover another. For blends, the certificate should report each component.
Step 3: Check the Test Date
Note when the sample was analyzed. Compare it with the date you received the material, and consider storage conditions in between. See peptide stability data.
Step 4: Check the Purity Method and Data
The certificate should state that purity was measured by HPLC and ideally include the chromatogram. Look for a dominant main peak and confirm the reported percentage is consistent with the peak table. See how to read an HPLC chromatogram.
Step 5: Check the Identity Result
Mass spectrometry should show an observed mass consistent with the expected molecular weight of the compound. Compare the observed value with the theoretical mass for the sequence. See reading a spec sheet: CAS number and mass spectrum.
Step 6: Confirm With the Testing Lab
The strongest check is independent: contact the laboratory named on the certificate, give it the lot number, and ask it to confirm that it issued the report. A supplier that names its lab and encourages this step is making its documentation checkable.
Step 7: File It With Your Records
Save a copy of the certificate with the lot number, date received and storage location. If the work is ever written up, the materials section can then cite the supplier, lot and analytical results.
Worked Example
On our BPC-157 page, the published certificate reads: lot GPU-5642336, 99.37% purity by HPLC with MS identity, tested by Horizon Analytical on 03 May 2026. To verify it, a researcher would match GPU-5642336 against the vial label, confirm the compound and size, open the certificate image to check the chromatogram and mass result, and email the lab with the lot number for confirmation. All of our published lot certificates are listed in the COA library. Reports describe tested samples; confirm the compound, size and lot supplied before relying on any report.
Related Reading
Peptide COA red flags, batch-specific vs representative COAs, lot numbers and traceability, the COA glossary, our COA policy, and the pillar Researcher's Guide to Peptides in 2026.
Frequently Asked Questions
What is the first thing to check on a peptide COA?
Whether the lot number on the certificate matches the lot number printed on the vial label. Without that match, the certificate does not document the vial in hand.
Can I contact the testing lab to verify a COA?
Yes. Contacting the laboratory named on the certificate with the lot number is the most direct way to confirm that the report was issued for that batch.
Does a COA for one size cover other sizes?
Not automatically. Check that the tested size or net content on the certificate matches the size supplied.
What should the identity section show?
A mass spectrometry result with an observed mass consistent with the theoretical molecular weight of the compound.
Does verifying a COA mean a product is safe to use?
No. Verification confirms that an analytical record matches a batch. A COA is research verification only and is not a statement of safety or suitability for any use.
All products referenced in this article are sold strictly for laboratory research use only. They are not for human or veterinary use, are not drugs, foods, or cosmetics, and are not intended to diagnose, treat, cure, or prevent any disease. A Certificate of Analysis is an analytical record for a tested sample; it is research verification only and is not a statement of safety or suitability for any use outside a qualified laboratory.
